Z-Wave Home Automation Australia

AEOTEC Heavy Duty Switch


AEOTEC Heavy Duty Switch


1 in stock

Purchase this product now and earn 139 Points!

Aeotec Z-Wave Heavy Duty Smart Switch can switch powered electrical devices and appliances that draw up to 40 amps or 9600 Watts of power. Includes built-in Z-Wave signal repeater and extended Z-Wave wireless range (up to 150m outdoors). Rated IP44 for both outdoor and indoor use.


Electronics that use up to 40 amps of power. They’re the big electronics and appliances in your home. Big fridges and pool pumps. Hot water systems and electric car chargers.

If it’s big, if it uses a lot of power, Heavy Duty Smart Switch was made for it.

Requires professional installation.

The Aeotec Heavy Duty Smart Switch must be installed by a licensed electrician.

Important safety information.

Warning: Be careful of electric shock. Only installation and maintenance personnel should operate this button.

Please read this and other device guides carefully. Failure to follow the recommendations set forth by Aeotec Limited may be dangerous or cause a violation of the law. The manufacturer, importer, distributor, and / or reseller will not be held responsible for any loss or damage resulting from not following any instructions in this guide or in other materials.

A licensed electrician with knowledge and understanding of electrical systems and safety should complete the installation.

Keep product away from open flames and extreme heat. Avoid direct sun light or heat exposure.

Heavy Duty Smart Switch Gen5 current can not exceed 40 amps.

Contains small parts; keep away from children.

Technical Information

Device Manuals

AEOTEC Heavy Duty Switch Manual

Technical Specifications

RF Protocol
Z‐Wave Plus (500 series chip)
RF Frequency
921.42Mhz ‐ AU/NZ  approved RF for Z‐wave
Z‐Wave device type
Binary switch
Operation Range
Up to 40m without obstacles
Indoor/Outdoor use, IP44
Operation temperature
0 ~ 50 °C
Storage temperature
‐10 ~ 60 °C
4.8 x 2.8 x 1.3 inches
Z-Wave Plus certified
Warranty 12 Months


There are no reviews yet.

Be the first to review “AEOTEC Heavy Duty Switch”

You may also like…

Z-Wave Home Automation Devices

Z-Wave Home Automation Australia specialises in distributing the largest range of Z-Wave products and devices in Australia, using the 921.4 MHz frequency. Our online store offers a variety of Z-Wave Smart Home brands that manufacture devices for a variety of solutions, such as, lighting, appliance, security and climate control automation. These products are of the highest quality with manufacturers from all over the world, ensuring your Home Automation system is secure and durable. Browse our complete range of products below.


Thank you for signing up!

Thanks for subscribing to our email service. Stay tuned for our upcoming newsletters and updates!