REMOTEC Z-Wave A/C Controller

Home  » Climate Control » REMOTEC Z-Wave A/C Controller
REMOTEC Z-Wave A/C Controller
Click to enlarge
Price: $119.00
Availability : OUT OF STOCK
Product Code: DHS-HVAC-AC-REM
No Reviews Yet

Quick Overview

 

 The Z-Wave A/C Controller (manufactured by Remotec) is a Z-Wave to air-conditioner IR extender.

  • Control your air-conditioner remotely using a Z-Wave Home Controller
  • Works with all types of AC IR interface
  • Built in temperature sensor informs you of current room temperature
  • USB powered, 5V DC Jack or 1 year battery life on 3 x AAA batteries

 

Product Details

 

The Z-Wave A/C Controller is a smart Z-Wave controller which allows you to remotely control your air-conditioner using a compatible Z-Wave controller. It works with any Z-Wave compliant gateway or controller by translating Z-Wave Thermostat Commands to AC IR control code. User can select the IR code from the built‐in code library by using Z-Wave Configuration Commands according to the parameter table,  or use the learning function through the gateway. The Z-Wave A/C Controller also has a built‐in temperature sensor which allows your gateway or controller to get the current room temperature.

 

The Z-Wave A/C Controller can be configured as either a “Frequently Listening Routing Slaves” (FLiRS) or an “Always Listening” node before including it to your Vera gateway. The FLiRS node type is for battery operated applications and it will enter sleep mode frequently in order to conserve battery power. The Always Listening node type is for areas where a fast response is required. It works with a 5V DC power source. Always Listening node can act as a repeater, which will re‐transmit the RF signal from the other Z-Wave devices in your network to ensure that the signal reaches its intended destination by routing the signal around obstacles and radio dead spots.

The Z-Wave A/C Controller also supports Network Wide Inclusion (NWI) and Explore Frames. It is compatible with Z‐Wave networks that contain multiple gateways and controllers. Like every Z‐Wave accessory, the user will need to include the Z-Wave A/C Controller into their Z‐Wave network using their primary controller. Then, the user can use either the primary or secondary controller to configure and setup the Z-Wave A/C Controller using Z‐Wave’s configuration command class. Once the configuration and setup is complete, the user can use the Z‐Wave “Thermostat commands class” to control their IR‐controlled air‐conditioner through the Z-Wave A/C Controller.

This product integrates with the following Australian certified (921.42MHz) Z-Wave controllers including:

  • Vera 3/Lite in UI5 and UI7
  • REMOTEC Z-Wave Universal Remote Controller

 

Product Support

  

Videos:

Integration with VeraEdge - REMOTEC Z-Wave AC IR Controller (YouTube)

Manuals:

REMOTEC Z-Wave AC IR Controller Full Manual (Size: 1.15 MB)

REMOTEC Z-Wave AC IR Controller IR Built-In Code Library (Size: 10 KB)

REMOTEC Z-Wave AC IR Controller Vera Integration Manual (Size: 280 KB)

 

Technical Specifications

 

RF Protocol
Z‐Wave
RF Frequency
921.42Mhz ‐ AU/NZ  approved RF for Z‐wave
Z‐Wave device type
Frequently listening, routing slave
Power
USB powered or 1 year battery life on 3 x AAA batteries
Operation Range
Up to 30m indoors with no obstacles
Application
Indoor use only
Operation temperature
-10 ~ 40 °C
Storage temperature
‐10 ~ 70 °C, humidity 5~95% RH(max)
Weight
150g
Housing
ABS
Compliance
C-Tick

 

No reviews have been made for this product.
Be the first to review this product!

Information

  • Products: 98
  • Categories: 13
  • Prices: Australian Dollars
 

Mailing List

Signup for the latest news on new products, special offers and saving opportunities. Subscribe to our mailing list below: