Z-Wave Home Automation Australia

Z-Wave Smart Valve Actuator


Z-Wave Smart Valve Actuator


2 in stock

Purchase this product now and earn 165 Points!

The Z-Wave Smart Valve Actuator allows you to remotely turn ON/OFF a water valve using Z-Wave wireless protocol (921.42 MHz in Australia) on a Z-Wave Gateway.


The Z-Wave Smart Valve Actuator allows you to remotely turn ON/OFF a water valve using Z-Wave wireless protocol (921.42 MHz in Australia) and Z-Wave Gateway.

700 series Z-Wave chip which is the newest technology from Silicon Labs.

Great wireless range.

700 series Z-Wave chip provides the best platform for wirelessly connected devices. With a wireless range above 100 meters, Z-Wave devices can now communicate 250% further using significantly less power. (While connected to a Certified 700 series Z-Wave Gateway)

Faster control.

Z-Wave is all about control and automation. 700 series does it fast. An 18% more powerful CPU is coupled with wireless transfers reaching 100 kbit/s and instantaneous security. 700 series Z-Wave chip performing much faster than all competitors.

It’s easily installed over existing valves without needing a plumber. All you need is a screwdriver, to take control of your own plumbing.

It ensures that you never have to deal with burst pipes or leaks that not only spoil your day but damage your home. The Z-Wave Smart Valve Actuator can not only automate your water main house feed or anything else that uses a quarter-turn ball valve, but it can also turn off your water automatically when leaks are detected or when you travel out of town.

  • Works on quarter-turn ball valves up to 1-1/4″
  • Z-Wave Chip 700
  • Installs on top of your existing water valve (no plumber necessary)
  • Z-Wave Plus certified
  • Built-in Z-Wave Range Extender
  • Single tool installation

Product Details

The Z-Wave Smart Valve Actuator allows you to remotely turn ON/OFF a water valve using Z-Wave Controller. You can use it to automate your water boiler, irrigation system, radient heat system or anything else that uses a quarter-turn ball valve.

The Z-Wave Smart Valve Actuator installs on top of your existing water valve with a single Phillips screwdriver. No plumber necessary!

Use this device alongside a Z-Wave Water Sensor to automatically close your water valve when a leak is detected to greatly decrease the extent of water damage. Sleep easy knowing that your home is safe from water damage even when you are on vacation.

This product is compatible with Australian certified (921.42MHz) Z-Wave and Z-Wave Plus controllers including:

  • Vera Edge/Plus
  • Fibaro Home Center 3/2/Lite

Technical Specifications

RF Protocol
Z‐Wave Plus (700 series chip)
RF Frequency
921.42Mhz ‐ AU/NZ  approved RF for Z‐wave
Z‐Wave device type
Z-Wave Switch
12 VDC
Power Consumption
Operation Range
Up to 100m indoors (with 700 Controller)
Indoor use only or under cover
Mounting Options
Quarter-Turn Valves from 1/2″ to 1-1/4″
Operation Temperature
5 – 40 °C
Storage temperature
‐10 – 50 °C
15mm x 89mm x 188mm


There are no reviews yet.

Be the first to review “Z-Wave Smart Valve Actuator”

You may also like…

Z-Wave Home Automation Devices

Z-Wave Home Automation Australia specialises in distributing the largest range of Z-Wave products and devices in Australia, using the 921.4 MHz frequency. Our online store offers a variety of Z-Wave Smart Home brands that manufacture devices for a variety of solutions, such as, lighting, appliance, security and climate control automation. These products are of the highest quality with manufacturers from all over the world, ensuring your Home Automation system is secure and durable. Browse our complete range of products below.


Thank you for signing up!

Thanks for subscribing to our email service. Stay tuned for our upcoming newsletters and updates!