REMOTEC Z-Wave Thermostat 500

Home  » Climate Control » REMOTEC Z-Wave Thermostat 500
REMOTEC Z-Wave Thermostat 500
Click to enlarge
Price: $269.50
Availability : In Stock
Product Code: DHS-HVAC-THR-REM500
Quantity:
 Add to Basket
No Reviews Yet

Quick Overview

 

The REMOTEC Z-Wave Thermostat ZTS-500 is a programmable electronic thermostat controller allowing you to keep your home at a comfortable temperature at all times. 
A smart thermostat designed with the end user in mind. It combines compatibility with any Z-Wave certified controller or gateway with an incredibly simple and intuitive user interface.

  • Support 2 stage heat, 2 stage cool, 2 stage fan 
  • 24Vac single & two stage conventional heating systems (gas/oil/electric) 
  • Heat pump systems with up to two stages of heating (electric/gas)
  • Zoned forced air and zoned hot water (2 or 3 wire)
  • Millivolt systems (12-24Vac or DC source)
  • Can be controlled by android smartphones and iPhones (via home controller) 
  • One or two stage cooling systems
  • Hybrid systems
  • Z-Wave Dual mode (FLiRS, Always Listening)

 REMOTEC Z-Wave Thermostat ZTS-500

Product Details

 

The REMOTEC Z-Wave Thermostat ZTS-500 is an intelligent, programmable thermostat controller with a blue  display which is easy to read even in dimly lit areas.

This thermostat delivers permanent day and time settings that are even maintained during power outages. It offers the option to remotely control / check your room temperature via a smart phone or PC which is associated with your Z-Wave Home controller.

For added convenience, the thermostat unit can be run using battery power or using power from your heating/cooling system, giving you the option of permanently eliminating battery changes.

This thermostat is compatible with a broad range of 24-volt heating and cooling systems, including both single-stage (cooling) and single and two-stage heating systems (non-heat pump), single-stage heat pumps, and heating-only or cooling-only systems. Uses standard thermostat connections:

 

 To check compatibility with your heater or HVAC system please see what terminals are in use at your current heater or HVAC systems.

 

Terminals

Function

Terminal

Cool changeover (heat pump)

O

Heat changeover (heat pump)

B

2nd Stage heater

W2

1st Stage heater

W1

Fan

G

Compressor

Y

24Vac Power for Cooling

RC

24Vac Power for Heating

RH

24Vac Common

C

 

This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:

  • Vera Edge/3/Lite
  • Fibaro HC2/Lite

 Please Note:

  • This device is not compatible with electric baseboard heaters (120 to 240 volts).  It is also not compatible with some multifunction 2-wired Japanese brand heaters and HVAC systems.
  • If you are not feeling confident with installing this thermostat get a heater/ac installer to do this job for you. 
  • This thermostat is backed by a one year limited warranty.

 

Product Support

  

Manuals:

Z-Wave REMOTEC ZTS-500 Thermostat Manual (Size: 992KB)

Videos / YouTube:

⇒ Z-Wave Remotec ZTS-500 Thermostat

Technical Specifications

 

RF Protocol
Z‐Wave 
RF Frequency
921.42Mhz ‐ AU/NZ  approved RF for Z‐wave
Z‐Wave device type
Z-Wave Plus Thermostat, Routing slave
Relay Contact
Voltage 24 VAC 50/60 Hz
Current: 1A Max (inductive)
Operating Voltage
DC 6V, 4 x AA batteries
OR 24 VAC ± 20% 50/60Hz
Operation Range
Up to 30m indoors with no obstacles
Temperature Measurable Range
32 ~ 99 °F / 0 ~ 40 °C
Application
Indoor use only
Operating Temperature
0 ~ 50 °C
Storage temperature
‐5 ~ 60 °C
Weight
190g
Housing
ABS
Compliance
CE, RCM
Regulatory Compliance Mark
N5496
Dimensions
(LxWxH) 160mm x 100mm x 27.5mm

 

No reviews have been made for this product.
Be the first to review this product!

Information

  • Products: 92
  • Categories: 13
  • Prices: Australian Dollars
 

Mailing List

Signup for the latest news on new products, special offers and saving opportunities. Subscribe to our mailing list below: