Z-Wave Sgl Sw Clipsal Saturn
Z-Wave Sgl Sw Clipsal Saturn
$176.00
2 in stock
This set allows you to control a single lighting circuit with Z-Wave. It allows for remote control using a connected Z-Wave gateway or manual control using the solid state (ON/OFF) button. The set contains:
- One QUBINO Z-Wave 1 Relay
- One Clipsal 1 Gang Saturn Series Wall Plate
- One Clipsal Saturn solid state (ON/OFF) button
The QUBINO Z-Wave 1 Relay (manufactured by GOAP in Europe) includes additional features compared to the previous dimmer used in this set. It uses the latest 500 Series Z-Wave chip, has a greater communication range and is fully integrated with Vera ADD Wizards as “Qubino Flush 1 Relay”. It also allows for 2-3 way wired switching.
Clipsal Saturn Series Wall Plates are available in the following colours; Espresso Black, Ocean Mist and Pure White.
Please specify the colour in your order.
An LED option is available for the Clipsal buttons. The LED is always on and helps you to locate the button in the dark. You can order the LED option for your buttons here.
Note: This product must be installed by a qualified electrician.
Technical Information
Device Manuals
QUBINO Z-Wave 1 Relay Compatibility List
Technical Specifications
Product Name: | QUBINO Z-Wave 1 Relay |
---|---|
Powered by: | 24V DC or 240V AC |
Operation Range: | 30 metres |
Max Load: | 2300W (230VAC) |
Radio Frequency: | 921.42 MHz (AU/NZ Z-Wave) |
Power Consumption: | 0.4W |
Operation Temperature: | -10°C- 40°C |
Temperature Measured Range: | 0.5°C (within 0°C – 40°C range) (optional sensor) |
Temperature Measuring accuracy: | 0.5°C |
Housing: | ABS |
Dimensions (W x H x D): | 41.8 x 36.8 x 15.4mm |
Be the first to review “Z-Wave Sgl Sw Clipsal Saturn”
You must be logged in to post a review.
Reviews
There are no reviews yet.