Z-Wave 2 Dim Clipsal Impress
Z-Wave 2 Dim Clipsal Impress
$220.00
2 in stock
The Z-Wave 2 Dimmer Clipsal Impress set allows you to control two lighting circuits both manually and remotely.
- Wall plate available in multiple colours
- Can be easily installed by a qualified electrician
- Can be ordered with an LED which will be ON constantly helping you to locate the switch in the dark
- Wide range of compatibility with existing lighting fittings and does NOT require expensive cabling
The Z-Wave 2 Dimmer Clipsal Impress set includes two QUBINO Dimmers (by GOAP) and one Clipsal 2 Gang Impress Series wall plate with two Impress push buttons. One button is used to control each circuit.
This set allows manual and remote control of two lighting circuits. It allows you to control your lights manually with push buttons or remotely from your Z-Wave remote, iPhone/iPod/iPad or Android device (requires a Z-Wave home controller).
This set can be ordered with an LED add-on which will be ON constantly helping you to locate the switch in the dark. Order the LED option here.
The Clipsal Impress series wall plate is available in multiple colours including:
- Brushed Aluminium
- Brushed Brass
- Chrome
- Gold
- White
Note: Please specify which colour of wall plate you require in your Order.
Compatibility:
Incandescent globes, High Voltage Halogens, Low Voltage Halogens with electronic transformers(Trailing Edge and Leading Edge only)
CFL globes: Dimmable Philips Tornado CFL lamps and similar products.
LEDs: High performance, energy efficient Starburst LED downlight from Pierlite Australia and similar products.
Generic LEDs will NOT work with this product. If you are unsure please talk to your electrician first.
Please Note:
This product must be installed by a qualified electrician.
Before engaging an electrician, check that they provide an electrical compliance certificate.
For warranty claim you have to provide an installation compliance certificate from your electrician.
Do not mix the load type as this will result in improper function of the dimmer. This will void the dimmer’s warranty.
The neutral wire is not required for the dimmer to function. Using it will void the dimmer’s warranty.
Technical Information
Device Manuals
QUBINO Z-Wave Dimmer Compatibility List
Technical Specifications
Product Name: | QUBINO Z-Wave Dimmer |
---|---|
Powered by: | 24V DC or 240V AC |
Operation Range: | 30 metres |
Max Load: | 2300W (230VAC) |
Radio Frequency: | 921.42 MHz (AU/NZ Z-Wave) |
Power Consumption: | 0.7W |
Operation Temperature: | -10°C- 40°C |
Temperature Measured Range: | 0.5°C (within 0°C – 40°C range) (optional sensor) |
Temperature Measuring accuracy: | 0.5°C |
Enclosure: | Plastic |
Dimensions (W x H x D): | 41.8 x 36.8 x 15.4mm |
Videos
Be the first to review “Z-Wave 2 Dim Clipsal Impress”
You must be logged in to post a review.
Reviews
There are no reviews yet.