VISION Z-Wave Siren DC Powered

$99.00

Availability: In Stock

The VISION Z-Wave Siren and Strobe DC is a wireless device capable of producing an audible and visual alarm.

  • Red LED flashing strobe light
  • Loud (105dB @ 1m) audible alarm
  • Low battery and tamper indicators
  • Includes a 15V DC power supply
  • Configurable with Z-Wave certified gateways

34 in stock

SKU: DHS-ALM-SIR-VIS-DC2 Category:

Description

Quick Overview

The VISION Z-Wave Siren and Strobe DC is a wireless device capable of producing an audible and visual alarm.

  • Red LED flashing strobe light
  • Loud (105dB @ 1m) audible alarm
  • Low battery and tamper indicators
  • Includes a 15V DC power supply
  • Configurable with Z-Wave certified gateways

 

Product Details

The VISION Z-Wave Siren and Strobe DC is a wireless device, fully programmable with Z-Wave gateways, capable of producing an audible and visual alarm based on your Z-Wave network settings.

This device is designed to operate alongside a Z-Wave enabled sensor which can detect a threat to your household. We recommend selecting any of the sensors below to suit your current needs:

The VISION Z-Wave Siren and Strobe DC also includes a battery status indicator which will notify you when its battery level is low and a tamper alarm which will alert the associated Z-Wave gateway if anyone attempts to tamper with this device.

This product integrates with Australian certified (921.42MHz) Z-Wave controllers including:

  • Vera Edge/Plus
  • Fibaro Home Center 2/Lite
  • Homeseer HS3
  • RaZberry Pi

Note: This device includes a 15V DC power supply.

Additional information

Weight 0.55 kg
Technologies

Z-WAVE

Technical Information

Device Manuals

VISION Z-Wave Siren DC Powered Manual

Configuration Command Class:

Parameter 0: Siren/ Strobe Mode, 1 Byte
Value: 0=Siren and Strobe enabled (default), 1=Siren only, 2= Strobe only.
Parameter 1: Alarm auto stop time command, 1Byte
Value: 0=30 seconds (default), 1= 60 secs, 2= 120 secs, 3= Siren will not stop automatically.

Technical Specifications

RF Protocol
Z‐Wave, Z-Wave Plus cerification
RF Frequency
921.42Mhz ‐ AU/NZ approved RF for Z‐Wave
Z‐Wave device type
Z-Wave binary switch
Internal Alarms
Tamper, Low Battery
Operating Voltage
9-24V DC / 6V Ni-MH CELL 150mAh (included)
Connection Type
wires
Operation Range
Up to 30m indoor with no obstacles
Application
Indoor use only
Operation temperature
-5°C – 55°C
Loud Audiable Alarm
105dB @ 1meter
Weight
290g
Housing
ABS
Dimensions
116mm x 77mm x 40mm
Compliance
RCM, CE

Reviews

There are no reviews yet.

Be the first to review “VISION Z-Wave Siren DC Powered”