Z-Wave Home Automation Australia

VISION Z-Wave Door/Window Sensor 4in1

VISION Z-Wave Door/Window Sensor 4in1

$75.00

Out of stock

The Vision 4 in 1 Z-Wave D/W Sensor is a small, battery powered, magnetic sensor capable of detecting when a door/window is opened, as well as changes in humidity, light and temperature.  This sensor is a Z-Wave enabled device (interoperable two-way RF mesh networking technology) and is fully compatible with any Z-Wave Plus enabled network and its security framework. Vision 4 in 1 Z-Wave D/W sensor  sends Z-Wave signal when door or window is opened or closed or there is a humidity, temperature, luminance change.

Quick Overview

The Vision 4 in 1 Z-Wave D/W Sensor is a small, battery powered, magnetic sensor capable of detecting when a door/window is opened, as well as changes in humidity, light and temperature.  This sensor is a Z-Wave enabled device (interoperable two-way RF mesh networking technology) and is fully compatible with any Z-Wave Plus enabled network and its security framework. Vision 4 in 1 Z-Wave D/W sensor  sends Z-Wave signal when door or window is opened or closed or there is a humidity, temperature, luminance change.

  • Completely wireless
  • Door/Window, humidity, temperature and illuminance sensor in one device
  • New Z-Wave 500 series chip supports over-the-air firmware updates
  • Low battery LED indicator
  • Easy installation

 

Product Details

The Vision 4 in 1 Z-Wave D/W Sensor also reports temperature, humidity and illumination changes to the associated Z-Wave gateway which can be used to improve the efficiency of your Smart Home.

Featuring the new Z-Wave 500 series chip the Vision 4 in 1 Z-Wave D/W Sensor supports higher data transfer rates (9.6/40/100kbps) as well as over-the-air firmware updates meaning it is always operating with the most advanced firmware available.

Integrates with Australian Z-Wave certified (921.42MHz) controllers including:

  • Fibaro Home Center 2/Lite
  • Homeseer

Please note: This product is also partially compatible with Vera Edge/Plus

Technical Information

Device Manuals

VISION Z-Wave Door/Window Sensor 4in1 Manual

Technical Specifications

RF Protocol
Z‐Wave Plus
RF Frequency
921.42Mhz ‐ AU/NZ  approved RF for Z‐Wave
Z‐Wave device type
Z-Wave binary sensor, multilevel command supported
Power
Two batteries, type AAA. 3V
Operation Range
Up to 30m indoor
Application
Indoor use only
Temperature detect range
-20 – 50 °C
Weight
60g
Housing
ABS
Dimensions
70mm x 27mm x 20mm
Compliance
RCM AS/NZS 4268

Reviews

There are no reviews yet.

Be the first to review “VISION Z-Wave Door/Window Sensor 4in1”

Your rating

X
[X]

Thank you for signing up!

Thanks for subscribing to our email service. Stay tuned for our upcoming newsletters and updates!