QUBINO Z-Wave Thermostat 2


Availability: In Stock

The QUBINO Z-Wave ON/OFF Thermostat 2 (manufactured by GOAP in Europe) is ideal for directly controlling electric or water-based heating systems such as electric water heaters or hot water pumps.

  • Z-Wave Plus certified
  • Includes digital temperature sensor
  • Can measure the power consumption of connected device (within 3% accuracy)
  • Extremely low energy consumption (less than 0.4W)
  • Frost free mode: Specifies a minimum temperature for the heating system connected to the module to prevent your pipes from freezing

Device Manual

29 in stock

SKU: DHS-HVAC-THR-QUB-02 Categories: ,


Product Details

The QUBINO Z-Wave ON/OFF Thermostat 2 can be used to directly control electric or water-based underfloor heating systems, electric water heaters, hot water pumps, electric radiators and similar. You can control it either remotely through the Z-Wave network or through wall switches.

The QUBINO Z-Wave ON/OFF Thermostat 2 also measures power consumption and supports the connection of a digital temperature sensor.

This product integrates with Australian certified (921.42 MHz) Z-Wave Controllers

Compatibility List



Configuring Z-Wave Devices:

Z-Wave devices often have several configurable parameters which you can change using your Vera’s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.

Every available configurable parameter is listed in your device’s user manual. In most cases your device’s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device.

Additional information

Weight 0.1 kg


Technical Specifications

Device Manuals

QUBINO Z-Wave ON/OFF Thermostat 2 Manual

QUBINO Z-Wave ON/OFF Thermostat 2 Compatibility List

Technical Specifications

Product Name: QUBINO Z-Wave ON/OFF Thermostat 2
Powered by: 230V AC or 24-30V DC
RF Protocol: Z-Wave Plus, Security S2, SmartStart Ready
Radio Frequency: 921.42 MHz (AU/NZ Z-Wave)
Operation Range: 30 metres
Rated Load Current of AC 1 x 10A / 230V AC
Rated Load Current of DC 1 x 10A / 30V DC
Output circuit Power of AC 2300W (230V AC)
Output circuit Power of DC 240W (24V DC)
Digital Temperature Sensor cable 1000 mm
Dimensions (W x H x D): 41.8 x 36.8 x 16.9mm


QUBINO On/OFF Thermostat 2 – Water Heater

You may also like…