The Z-Wave 2 Dimmer Clipsal Saturn set allows you to control two lighting circuits both manually and remotely.
- Wall plate available in multiple colours
- Can be easily installed by a qualified electrician
- Can be ordered with an LED which will be ON constantly helping you to locate the switch in the dark
- Wide range of compatibility with existing lighting fittings and does NOT require expensive cabling
The Z-Wave 2 Dimmer Clipsal Saturn set includes two QUBINO Z-Wave Dimmers by GOAP and one Clipsal 2 gang Saturn series wall plate with two Saturn push buttons. One button is used to control each circuit.
This set allows manual and remote control of two lighting circuits. It allows you to control your lights manually with push buttons or remotely from your Z-Wave remote, iPhone/iPod/iPad or Android device (requires a Z-Wave home controller).
This set can be ordered with an LED add-on which will be ON constantly helping you to locate the switch in the dark. Order the LED option here.
The Clipsal Impress series wall plate is available in multiple colours including:
- White
- Ocean Mist
- Espresso Black
Note: Please specify which colour of wall plate you require in your comment.
This product integrates with all Australian certified (921.42MHz) Z-Wave home controllers including:
- Vera Edge, Vera Plus
- Fibaro Home Center 2/Lite
- DHS Z-Wave Universal Remote Controller
- DHS Z-Wave Mini Remote Controller
Compatibility:
Incandescent globes, High Voltage Halogens, Low Voltage Halogens with electronic transformers(Trailing Edge and Leading Edge only)
CFL globes: Dimmable Philips Tornado CFL lamps and similar products.
LEDs: High performance, energy efficient Starburst LED downlight from Pierlite Australia and similar products.
Generic LEDs will NOT work with this product. If you are unsure please talk to your electrician first.
Please Note:
This product must be installed by a qualified electrician.
Before engaging an electrician, check that they provide an electrical compliance certificate.
For warranty claim you have to provide an installation compliance certificate from your electrician.
Do not mix the load type as this will result in improper function of the dimmer. This will void the dimmer's warranty.
The neutral wire is not required for the dimmer to function. Using it will void the dimmer's warranty.
If you need further information about this product feel free to contact us.
Manuals:
⇒ QUBINO Z-Wave Dimmer InWall Installation Manual
⇒ Guide to Configuring Z-Wave Devices with Vera UI7 (Size: 435 kB)
Videos / YouTube:
⇒ The smallest Z-Wave module
⇒ QUBINO Dimmer dimming a 24V DC LED Strip Lights
|
RF Protocol
|
Z-Wave Plus™ , SDK version: 6.51.03
|
|
RF Frequency
|
921.42Mhz ‐ AU/NZ approved RF for Z‐wave
|
|
Application
|
Indoor use only
|
|
Power
|
0.6 A / 230 VAC
0.85 A / 30 VDC
|
|
Operation Range
|
Up to 30m indoors with no obstacles
|
|
Enclosure
|
|
|
Comliance
|
|
| Operating Temp. |
-10C ~ +40C |
|
Dimensions
|
41.8mm x 36.8mm x 15.4mm
|
