The Fibaro Z-Wave Universal Sensor is a wireless module that allows sensors with a binary output to communicate with the wireless Z-Wave network.
- Supports four DS18B20 temperature sensors
- Compatible with regular and parametric alarm lines (up to 2 alarm detectors)
- Inputs: 2 potential-free inputs, 1 digital 1-wire input
- Outputs: 2 potential-free outputs
The Fibaro Z-Wave Universal Sensor is a wireless module that makes it possible to improve the functionality of any sensor with a binary output by allowing it to communicate with the wireless Z-Wave network and the Z-Wave Gateway. Moreover, the module allows for wireless communication between the system and the DS18B20 temperature sensors. The device can service up to two binary sensors and up to four DS18B20 temperature sensors.
The Fibaro Z-Wave Universal Sensor may be used whenever wireless collection of data from wired sensors is required. Once additional safety housing have been installed, the device can also be used in areas with high humidity and high temperature.
The Fibaro Z-Wave Universal Sensor's main function is the integration of the wireless Z-Wave System with the existing wire-based and wireless alarm and measurement systems.
This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:
- Vera Edge/3/Lite
- Fibaro Home Controller 2/Lite
- DHS Z-Wave Universal Remote Controller
Please check the maximum load before installing/operating.
This installation must be done by a certified electrician in Australia and New Zealand.
Before engaging an electrician, check that they provide an electrical compliance certificate.
For warranty claim you have to provide an installation compliance certificate from your electrician.
Manuals:
⇒ Fibaro Z-Wave Universal Sensor Manual
Videos / YouTube:
⇒ Fibaro Home Center 2 Presentation
RF Protocol
|
Z‐Wave (Multilevel Command Class)
|
RF Frequency
|
921.42Mhz ‐ AU/NZ approved RF for Z‐wave
|
Z‐Wave device type
|
Z-Wave binary sensor, slave
|
Power
|
9 - 30V DC ± 10%
|
Max. Current of Outputs
|
150mA
|
Operation Range
|
Up to 20m indoors with no obstacles
|
Application
|
Indoor use only
|
Measurment Range
|
-55C ~ 126°C
|
Operation Temperature
|
0 ~ 40 °C
|
Storage Temperature
|
‐10 ~ 80 °C
|
Weight
|
40g
|
Compliance
|
|
Regulatory Compliance Mark
|
|
Dimensions
|
(LxWxH) 14.5mm x 27.3mm x 12mm
|