Z-Wave 2 Dim Clipsal Saturn

Home  » Lighting Automation » Z-Wave 2 Dim Clipsal Saturn
Z-Wave 2 Dim Clipsal Saturn
Click to enlarge
Price: $297.00
Availability : In Stock
Product Code: DHS-SET-DM-SAT4
 Add to Basket
No Reviews Yet

Quick Overview


 The Z-Wave 2 Dimmer Clipsal Saturn set allows you to control two lighting circuits both manually and remotely.

  • Wall plate available in multiple colours
  • Can be easily installed by a qualified electrician
  • Can be ordered with an LED which will be ON constantly helping you to locate the switch in the dark
  • Wide range of compatibility with existing lighting fittings and does NOT require expensive cabling


Product Details


The Z-Wave 2 Dimmer Clipsal Saturn set includes two DHS Z-Wave In-Wall Dimmer and one Clipsal 4 gang Saturn series wall plate with four Saturn push buttons. One button is used to dim the light while the other button is used to brighten the light in each circuit.

This set allows manual and remote control of two lighting circuits. It allows you to control your lights manually with push buttons or remotely from your Z-Wave remote, iPhone/iPod/iPad or Android device (requires a Z-Wave home controller). 

This set can be ordered with an LED add-on which will be ON constantly helping you to locate the switch in the dark. Order the LED option here.

The Clipsal Saturn series wall plate is available in multiple colours including:

  • White
  • Ocean Mist
  • Espresso Black

Note: Please specify which colour of wall plate you require in your comment.

This product integrates with all Australian certified (921.42MHz) Z-Wave home controllers including:

  • Vera 3/Lite
  • Fibaro Home Center 2/Lite
  • DHS Z-Wave Universal Remote Controller
  • DHS Z-Wave Mini Remote Controller


Incandescent globes, High Voltage Halogens, Low Voltage Halogens with electronic transformers(Trailing Edge and Leading Edge only)

CFL globes: Dimmable Philips Tornado CFL lamps and similar products.

LEDs: High performance, energy efficient Starburst LED downlight from Pierlite Australia and similar products.

Generic LEDs will NOT work with this product. If you are unsure please talk to your electrician first.

Please Note:

This product must be installed by a qualified electrician.
Before engaging an electrician, check that they provide an electrical compliance certificate.
For warranty claim you have to provide an installation compliance certificate from your electrician.
Do not mix the load type as this will result in improper function of the dimmer. This will void the dimmer's warranty.
The neutral wire is not required for the dimmer to function. Using it will void the dimmer's warranty.


Product Support



Z-Wave In-Wall Dimmer Manual (Size: 147KB)

Videos / YouTube:

Z-Wave In-Wall Dimmer

Fibaro Home Center 2 Presentation


Technical Specifications


RF Protocol
Z‐Wave(Multi-Level Command Class)
RF Frequency
921.42Mhz ‐ AU/NZ  approved RF for Z‐wave
Z‐wave device type
Z-Wave multiple level dimmer, routing slave
AC 230/ 50Hz
Operation Range
Up to 30m indoor with no obstacles
Dimming Interval
1% with safety minimum set up at 25%
Dimmer Type
Universal, compatible with electronic transformers (Trailing Edge and Leading Edge).  Not compatible with iron core transformers.
Indoor use only
Operation temperature
0 ~ 55 °C
Max/Min Load
 300W / 75W
Storage temperature
‐10 ~ 80 °C
AS/NZS 4268:2008, AS/NZS CISPR 15, IEC60669-2-1
Regulatory Compliance Mark
Load Compatibility
Incandescent globes, High Voltage Halogens, Low Voltage Halogens with electronic transformers Trailing Edge or Leading Edge type only.
Dimensions of Dimmer
(LxWxH) 45mm x 48mm x 18mm
Dimensions of Wall Plate
(LxWxH) 116mm x 75mm x 12mm



  • Products: 95
  • Categories: 13
  • Prices: Australian Dollars

Mailing List

Signup for the latest news on new products, special offers and saving opportunities. Subscribe to our mailing list below: